Purview Integration Wireless Controller 9.21

[Michael_Kirchne]

Hi community,

has anyone integrated the wireless solution V 9.21 into Purview? I get the TopN Mirror up and running but I don't get netflow packets.

Netflow is configured in the section "VNS->Global->NetflowMirrorN"
There I configured the Mgmt IP of my Purview instance and choose esa1 as my L2 Mirror Port.

Any idea?

Best Regards
Michael

[Ronald_Dvorak]

Thanks Paulo,

I've took a closer look into the KT and have two more questions...

1) controller mirror port
Is the traffic send untagged or is the tag from the respective role used to forward the traffic to Purview?

2) mirror N packets
If I unterstand it correctly only the first 15 packets/flow are mirrored to Purview per default.
So I should be able to enable it also for remote/branch offices without having all data copied back to the controller, right ?

-Ron

[Luis_Mendes]

Collector process don´t show FLOWS Records...but sensor read packets

[Luis_Mendes]

Yes

I choose plug controller direct to the VM (C5210). If you call "tcpdump" the traffic exist and statitisc of purview appears. I have the same scenario but with traffic untagged and purivew show the traffic and informations. But with Tagged, no show

any Idea?

[Ronald_Dvorak]

- is the link to the VM server a trunk and all VLANs are allowed ?
- is the VM vswitch set to promiscuous mode and VLAN ID set to "all" so all VLANs are forwarded ?

I've choosen the "easy" way and use a dedicated NIC on my VM which I've directly connected to my WLAN controller mirror port which works great.

[Luis_Mendes]

Hi

When i use TAGGED on any ESA the traffic don´t appear on Purview, if the interface outside configured was untagged the purview show the connections, if tagged packets the purview count but not appear on dashboard. Any idea??