Wireless AP3660 keeps resetting.

[Laura]

I have a Wireless 3660 AP that keeps resetting itself. I'm using POE. I'm not sure why it keeps resetting.

[Craig_Guilmette]

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Collect-Access-Point-Logging-Inform...

[Joshua_Puusep]

Hello,

Can you provide further information such as the AP and Controller Firmware version, whether there are any log entries for the AP on the controller, have you tried factory resetting the device, etc? Was the AP working and spontaneously started rebooting, or is this a new installation? How often does it reboot? Thanks.

[Joshua_Puusep]

If the AP is showing up in the controller as active at any point, then it's probably not a discovery issue. I would recommend you follow the link that Craig provided, get a trace file for the AP in question and submit it to GTAC.

[Laura]

I reset the AP and approved the AP. It started working again for about 5 minutes and then back down. It has went down and LED1 blinks red and LED3 blinks green for about 80 seconds. Then LED1 goes solid green for about 40 seconds. The AP repeats that cycle.