wireless controller first login c5210

[Husam]

Hi all

I got new wireless controller C5210. I need to do the first login. I have connected my laptop to port eth0 of the controller. my laptop IP is 192.168.10.10. I can not login the controller at the default IP which should be 192.168.10.1 and port 5825 neither can't ping this IP.

anyway have advice for such case.

Thanks in advance,
Husam

[Doug]

If it still does not work you can try to attach a console cable directly to the controller.

https://gtacknowledge.extremenetworks.com/articles/Q_A/Using-the-Console-Port-on-the-IdentiFi-Wirele...

Please note, the fans will spin even when the appliance is offline so make sure the appliance is really powered up.

[Doug]

what happens when you press enter, will it get you to a prompt?

[Husam]

also this output:

FI Shell version 2.00 [4.632]Current running mode 1.1.2
Device mapping table
blk0 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part1,Sig76E8F4C6)
blk1 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part2,Sig76E8F4C6)
blk2 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part3,Sig76E8F4C6)
blk3 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part4,Sig00000000)
blk4 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part5,Sig00000000)
blk5 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part6,Sig00000000)
blk6 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part7,Sig00000000)
blk7 :HardDisk - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part8,Sig00000000)
blk8 :BlockDevice - Alias (null)
Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)

Press ESC in 1 seconds to skip startup.nsh, any other key to continue.

[Husam]

Also below output

Version 2.00.1201. Copyright (C) 2010 - 2012 American Megatrends, Inc. Bios Version: SE5C600.86B.01.08.0003.022620131521
BMC Firmware Version: 1.17.4207
SDR Version: SDR Package 1.09
ME Firmware Version: 2.1.7.112
Platform ID: S2600GZ
System memory detected: 16384 MB
Current memory speed: 1333 MT/s
Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
Number of physical processors identified: 2
********************************************************************************
AHCI Capable Controller enabling 2 ports of 6Gb/s SATA
SAS/SATA Capable Controller configured with 4 ports in SATA mode
********************************************************************************
USB Keyboard detected


Press to enter setup, Boot Menu, Network Boot