XMC (v.8.2.6.5) show Wireless Controllers C5210 (v.10.51.05.0005) down.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-05-2019 08:49 AM
We have a problem between XMC and a pair C5210 wireless controllers.
All works fine but in "XMC /Wireless" controllers are down and we can't see the reports.
Somebody have the same issue?
Thanks in advance.
All works fine but in "XMC /Wireless" controllers are down and we can't see the reports.
Somebody have the same issue?
Thanks in advance.
11 REPLIES 11
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-27-2019 08:08 AM
All time we have this log on XMC:
2019-09-27 01:38:08,218 ERROR [com.siemens.bk.config.taskutils.factory.cli.utils.CliSession] Timeout during receive; while waiting for wirelessurjc#; received so far: "wirelessurjc"
Exception: 'ascii' codec can't decode byte 0xc2 in position 4006: ordinal not in range(128). (file=/usr/lib64/python3.5/ascii.py:26 function=decode)
Any idea?
On Gtac are on same point...
Thanks
2019-09-27 01:38:08,218 ERROR [com.siemens.bk.config.taskutils.factory.cli.utils.CliSession] Timeout during receive; while waiting for wirelessurjc#; received so far: "wirelessurjc"
Exception: 'ascii' codec can't decode byte 0xc2 in position 4006: ordinal not in range(128). (file=/usr/lib64/python3.5/ascii.py:26 function=decode)
Any idea?
On Gtac are on same point...
Thanks
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-13-2019 01:13 PM
It doesn't work neither.
"Dirty:true SYNC_WARN_POLLING_NOT_STARTED"
I'll try to delete all wlc from XMC, reboot controllers and configure again in SMC...
Thanks Ron
"Dirty:true SYNC_WARN_POLLING_NOT_STARTED"
I'll try to delete all wlc from XMC, reboot controllers and configure again in SMC...
Thanks Ron
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-11-2019 02:36 PM
copy/paste from this post....
https://community.extremenetworks.com/extrememanagement-230297/after-upgrading-to-xmc-8-1-4-40-all-a...
Check the following:
in XMC go to administration --> diagnostics
Make sure the "Level" at the top is set to "Diagnostic"
Click on historical Statistics collection --> Collector status
Scroll down to the "Wireless Discover" section
Check the status of the SYNC
Does it say SYNC-SUCCEEDED or does it say INVALID SHARED SECRET?
-Ron
https://community.extremenetworks.com/extrememanagement-230297/after-upgrading-to-xmc-8-1-4-40-all-a...
Check the following:
in XMC go to administration --> diagnostics
Make sure the "Level" at the top is set to "Diagnostic"
Click on historical Statistics collection --> Collector status
Scroll down to the "Wireless Discover" section
Check the status of the SYNC
Does it say SYNC-SUCCEEDED or does it say INVALID SHARED SECRET?
-Ron
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-10-2019 08:06 AM
It doesn't work neither.