Hi, we try to configure 802.1x on identifi controller (C35) with Windows NPS. we use CHAP on both controller 802.1x configuration and in NPS but we are receiving error "Response error 66" thanks in advance. regards, marlon
Hi, I understand that Extreme policy can control the Bonjour traffic. So, here I have two questions; (1) Is there any demerit when I make a policy that AP rejects the bonjour packet at the edge? (2) Usually, how much percentage of the traffic occup...
I have few question about Session Availability on IdentifI Wireless Controller C35.I have three controller on different location and each Controller have own APs. If I need to use C35-No.1 is Primary for APs-No. 1 to 25 and Backup for APs-No. 26 to 5...
HI I have a customer with 700 aps on a campus, and when the customer move from one building to other and lose the conection with ap and when move to another build reconnect, and stop the traffic... Its necessary manually reconect. The time ...
Hi,we have a V2110 Controller HA-Pair with EWC-Firmware 10. Both are on different locations with topologies in different subnets. Both locations are connected directly with 10G. Now when a Fast Failover occurs, clients are connected into the topology...
