Assign SSIDs using Classification Rules question

[ascoyne]

We have three SSIDs on a network profile.  If we start to use the "Assign SSID using Classification Rules" feature to assign one of the SSID's to specific APs using CCG, but leave the "Assign SSIDs using Classification Rules" blank for the other two SSID does this mean the different two SSIDs would be available on all APs, or available on no APs?

[christopheB]

I correct, you can decide on which APs you broadcast the SSID by using "Assign SSIDs using Classification Rules".

If the rule match = the manager apply the SSID depending  on the rule

When SSID with the "Assign SSIDs using Classification Rules" blank = no rule = apply to all APs

PS: you can manually on/off SSIDs on the local settings of the AP

[ascoyne]

Thanks @Ash_Finch that worked perfectly.  Appreciate the quick response.

[Ash_Finch · Accepted solution]

If there's no classification rule for an SSID it will be broadcast on all APs.