cancel
Showing results for 
Search instead for 
Did you mean: 

The AP305CX access point LED is orange, but the antenna radios and the antenna itself are online

The AP305CX access point LED is orange, but the antenna radios and the antenna itself are online

Luis_Agner
New Contributor III

I have an AP305CX running version 10.8.6.0 where the LED is orange, which is usually associated with a lack of internet/cloud connectivity. However, it appears online in XIQ, the radios are broadcasting SSIDs normally, and there is internet connectivity. Has anyone experienced this issue?

 
 
 
Luis Carlos Agner Claro from Brazil
https://www.linkedin.com/in/luiscarlosagnerclaro/
5 REPLIES 5

Diego_Esparza
New Contributor

Que tal tengo entendido que estos APs despliegan ese led cuando su PoE no es el necesario en XIQ o EP1 aparece cuando un AP no lo recibi, ademas hay un apartado en la configuracion de politicas de red donde puedes configurar el led que quieras que muestre el AP, revisa y nos cuentas.

DeVoID
Valued Contributor

I rememebr when I had that light... mean one of the radio interfaces was down... what a nightmare that was, and I honestly dont recall how it was fixed, but there was talk bout it being the wrong power, but that is why I had the slow blinking orange lights...

want to read a nightmare, i found the post - be sure to go to page one thought -::

https://community.extremenetworks.com/t5/extremewireless-iqe/why-is-status-gt-gt-advanced-channel-se...

DeVoID
Valued Contributor

I had that "\operating on 802.3af power instead of 802.3at power" error once, but it was NOT the power.  I dont recall the fix - maybe went back a firmware or two - but it could be posted someplace in these forum's, i documented everything here, just dont have time to find it.

Debbie219Adams
New Contributor

Hello!  AccuLynx login

Yes, this is a known quirk. On firmware 10.8.6.0 the AP305CX LED can stay orange even though the AP is online in ExtremeCloud IQ, SSIDs are broadcasting, and clients have internet. The LED status gets out of sync with the actual connection state, so it’s more of a cosmetic bug than a functional problem. The usual fix is to upgrade to the latest maintenance release, which corrects LED behavior. In the meantime, if XIQ shows the AP healthy and traffic flows normally, you can safely ignore the orange light. 

GTM-P2G8KFN