XIQ Wifi 802.1x authentication with Cisco ISE

[yrookie]

Hello everyone!

I am implementing some APs in an environment where it will be necessary to have Wi-Fi networks with authentication via an external radius server, in this case with Cisco ISE. However, this demand is something new to me and I do not have the configuration parameters for the Extreme devices to be added to Cisco ISE, I only have the dictionary.

In this scenario, we will use authentication via radius and also CoA.

Could any of you who have already done this configuration tell me how it was executed within Cisco ISE?

Thank you

[Christoph_S]

Hello @yrookie,

Please follow this guide for setting up an external radius policy: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000066186

Please make sure you add all APs as friendly devices into your radius server. 

BR,

[yrookie]

Hi @Christoph_S !

Thank you for sending it, but my question is basically about the configuration of Extreme within Cisco ISE. If someone from Extreme has done such configuration within ISE, could they tell me how this implementation was done?

For example: Device Profile, Policy and Posture.

But I thank you in advance for this information.