310I WAP DC NX7500

[OGB-NIKO]

How do i make or change a current WAP in to a DC for the controller to see WAPs from other subnet ?

[Christoph_S · Accepted solution]

Hello @OGB-NIKO,

Please elaborate on what it is you are trying to do and what the end goal is?

BR,

[OGB-NIKO · Accepted solution]

I am trying to make my controller the rf domain manager for the HighDomain i need the sexact synatx

[Christoph_S]

If the controller is in the same rf-domain as the APs then it will automatically be elected as RFDM. If you want the controller to be the RFDM for a remote site then you will have to configure the following parameter in the rf-domain for said site:

#controller-managed

This is however, not recommended for remote sites, the RFDM should be one of the APs with control-vlan configured in the rf-domain policy. 

Does this help?

BR,

[Christoph_S · Accepted solution]

Hello @OGB-NIKO,

Please elaborate on what it is you are trying to do and what the end goal is?

BR,