cancel
Showing results for 
Search instead for 
Did you mean: 

404 - Not Found

404 - Not Found

Vimalraj_Veerab
New Contributor III
Hi there,

I'm using VX9000(5.9.1.2-006R) with 54 AP7532 adopted with it.

While checking from AP configuration on management-policy default http and https server both are enabled.

But while trying to connect from web UI I'm getting error of 404- Not Found on both https and http.

8 REPLIES 8

Hi Vimalraj,

As Rob stated, Adopted APs are provisioned with a lean image upgrade when adopted and managed by a controller. Lean images do not provide GUI access since controller management is assumed.

RobertZ
Extreme Employee
The controller by default uses the lean image to upgrade the APs during adoption.

How to check from AP side it is loaded with LEAN image or full image .?

Thanks for the update.
GTM-P2G8KFN