Good day dears,We have some extreme AP4511 that seems to be not working properly and both led are solid,Although when the AP is connected to a PoE switch, the switch port is up. I tried to factory reset the AP using the reset button but it didn’t wor...
Hello community,I see that the WING 7.6.3 was release and it includes the new HTML5 GUI.Several questions:For now, the new GUI is available only on controllers. It will be available also on WING7 APS ?I see that the new GUI is need a tons of fixes an...
I have an AP510E with RF-Domain as CA (Canada), and radio2 on 5G channel 153WW . I am not using smart-RF currently. The issue I have is that my AP’s radio2’s transit power maxes at 18dbM, even though I configured the transit power on the WebUI as 30d...
hello, i was looking at APs for my home lab and came across the AP650, and learnt it needed an RFS controller to work, reading the brochures about the RFS-7000 i saw there was quite a few licensing options, and i started to wonder what the licenses w...
We have 7562 in our system and for radio2 i see this message “STATE : Off [channel invalid for radio]”. Also despite 10.0 dbi 2.4 antenna and 5.9 dbi 5 GHZ antenna the access points are performing bad signal distribition. When i walk a...
