AP 7522 NOT Boradcasting SSID but AP6532 is.

[Julio_Oliveira]

Hi all,

I have one AP 7522 and one AP 6532 both using the same version (5.8.4) and I have a RFS6000 with the same version as well.

Both APs are in the same network and both are being adopted by Auto Provisioning Policy on the controller.

I can manage both aps and I can see both on the mint protocol as well.

I am not using the default profile I have created for both models and AP6532 is broadcasting the SSID normally but AP7532 is not.

As I said, same network, same RF Domain, the only difference is the model of access point.

Any idea?

Thanks

[Julio_Oliveira]

Chris,

Both APs are using the same RF Domain.

ap6532-815630# show running-config rf-domain UK |in country-code
country-code gb

ap7522-A882DC*# show running-config rf-domain UK |in country-code
country-code gb

[ckelly]

Ha! Yep....this does happen periodically. AP has a U.S. based SKU....but the country code is set for something non-U.S or vice-versa.

[Julio_Oliveira]

The AP 6532 is WR domain with 5.8.4 and I can broadcast the SSID. So I believe this information is just for AP75XX and not for every model as per the document says.

[Ondrej_Lepa]

Hi Julio,

make sure you have same SKU and supported country code assigned to both.
You can check radio status with
show wireless radio details | on And see if there is a problem.

See also this exemplar article:

What WiNG version allows using EU country codes in WR domain?

Regards,
Ondrej

[BrandonC]

What does 'show wireless radio detail ap7522-A882DC' show?