cancel
Showing results for 
Search instead for 
Did you mean: 

AP310/410/i/e LED description

AP310/410/i/e LED description

MichalK
New Contributor III

Hi,

 

I'm probably missing something but I cannot find LED indicator placement on new APs (310/410). In the installation and quick reference guides is only a table with colour description and "The LED indicators are located on the front face of the access point but are not visibly marked.” note. But which LED is which ???

 

Regards,

Mike  

1 ACCEPTED SOLUTION

Christoph_S
Extreme Employee
6 REPLIES 6

Christoph_S
Extreme Employee

Hello Michal,

 

Just tested, looks like VC status. The LED was blinking green under these conditions:

 virtual-controller
 no rf-domain-manager capable
 

Will modify article accordingly. 

 

Thank you,

 

Chris

Christoph S.

MichalK
New Contributor III

@Christoph S. there is another thing missing in description: AP Status LED Green blinking - AP is Virtual Controller (or RF domain manager?) 

MichalK
New Contributor III

https://documentation.extremenetworks.com/wireless/QRG/AP410ie_QuickRef.pdf?_ga=2.132958861.26442445...

 

There are 3 radios and Bluetooth (as Radio 4 in that case?) mentioned. Radio 3 is usually sensor

Christoph_S
Extreme Employee

Hello Mike,

 

1 - 2.4 GHz radio

2 - 5 GHz radio

3 - Sensor

 

Of course you can have Radio Modes SSR, but 3rd radio can’t be either 2.4 or 5 GHz. 

 

Rgds,

 

 

Christoph S.
GTM-P2G8KFN