cancel
Showing results for 
Search instead for 
Did you mean: 

AP3965 with 1 WS-AO-DQ04360N and Tee Adapters

AP3965 with 1 WS-AO-DQ04360N and Tee Adapters

Jake_Koch
Extreme Employee
Hello,

I am newer to Extreme Wireless.

Is it possible to use a single WS-AO-DQ04360N 4DBI OMNI (part no: 30724) with Type-N Tee Adapters to connect both the 2.4ghz radio and the 5ghz radio to the same Antenna, is this possible, will it cause any problems?

(here is an example of a Tee Adapter)
https://www.pasternack.com/n-tee-adapters-category.aspx

Also, does Extreme offer a Female to Male Type-N Right Angle adapter? I have a customer that is trying to coil up some LMR400 cables in the same box the AP is going to be in, and when the cables plug straight into the AP, they can not bend tight enough to fit in the box... a 90 degree adapter would fix this.

(example )

https://www.americanradiosupply.com/type-n-male-female-right-angle-elbow-coaxial-adapter-connector/?...



thanks,

Jake
8 REPLIES 8

ckelly
Extreme Employee
Jake, this is the SKU for the 10' cable:
ML-1499-10JK-01R (ft. Low-Loss Coaxial Cable Jumper: N Male
to N Male)

Jake_Koch
Extreme Employee
thank you, that is what I thought.

what is the SKUs for the 10', I can't seem to find it.

Jake

ckelly
Extreme Employee
Jake, we do have 2 SKUs for antenna cables that I know of. One is for a 10' and the other is 25ft LMR.
If you want to keep them shorter, which it sounds like you would, then you'll need to look at 3rd party.

Jake_Koch
Extreme Employee
What about just some short (1 or 2 foot) MLR200 or LMR100 Male to Female Type-N cables... do we (Extreme) sell those ? (I have not been able to locate those in the system)

GTM-P2G8KFN