a week ago
AP460e regulatory issue found on 5Ghz radio also AP do not transmit full power to 2.4Ghz radio. Showing less dbm eg..10 dbm. Kindly help
a week ago
For the AP460e, the 5GHz radio's regulatory issue might require a firmware update to resolve, as this often addresses country-specific power limits. To fix the 2.4GHz radio's low transmit power (10 dBm), check and adjust the channel and transmit power settings in the access point's configuration.
a week ago
The model number is AP460e WR
Here is the running configuration
login as: admin
admin@10.136.142.29's password:
ap460-D9B16C>show run
!
! Configuration of AP460 version 7.9.6.1-003R
!
!
version 2.7
!
!
client-identity-group default
load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit D HCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-descriptio n "deny windows netbios"
deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP l ocal broadcast"
permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
permit any any type ip rule-precedence 10 rule-description "permit all IPv4 tra ffic"
permit any any type arp rule-precedence 20 rule-description "permit all ARP tra ffic"
!
ip snmp-access-list default
permit any
!
firewall-policy default
no ip dos tcp-sequence-past-window
no stateful-packet-inspection-l2
ip tcp adjust-mss 1400
!
!
mint-policy global-default
!
meshpoint-qos-policy default
!
wlan-qos-policy default
qos trust dscp
qos trust wmm
!
radio-qos-policy default
!
wlan wlan1
ssid JEIM_FMS
vlan 1
bridging-mode local
encryption-type ccmp
authentication-type none
wpa-wpa2 psk 0 ping 169.254.177.108 -t
!
meshpoint FMS-MESH
meshid 1
beacon-format mesh-point
control-vlan 1
allowed-vlans 1
neighbor inactivity-timeout 60
data-rates 2.4GHz gn
data-rates 5GHz an
security-mode none
root
!
smart-rf-policy default
assignable-power 5GHz max 20
assignable-power 5GHz min 16
assignable-power 2.4GHz max 20
assignable-power 2.4GHz min 16
no select-shutdown
no smart-sensor
smart-sensor auto-trigger
smart-sensor band smart-band-5GHz
smart-sensor tri-radio-only
!
!
management-policy default
telnet
no http server
https server
rest-server
ssh
ssh enable-weak-mac-algo 1
user admin password 1 89b8e97a75cfce3cf560641d7f43141c492d16b650c93a4426a137b39 cd999ea role superuser access all
snmp-server community 0 private rw
snmp-server community 0 public ro
snmp-server user snmptrap v3 encrypted des auth md5 0 admin123
snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123
!
profile ap460 default-ap460
autoinstall configuration
autoinstall firmware
crypto ikev1 policy ikev1-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ikev2 policy ikev2-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
crypto ikev1 remote-vpn
crypto ikev2 remote-vpn
crypto auto-ipsec-secure
crypto load-management
crypto remote-vpn-client
interface radio1
channel 13w
power 30
data-rates gn
placement outdoor
wlan wlan1 bss 1 primary
meshpoint FMS-MESH bss 2
wireless-client tx-power 20
antenna-mode 2x2
no 11axSupport
interface radio2
channel 161ww
power 30
data-rates an
placement outdoor
wlan wlan1 bss 1 primary
meshpoint FMS-MESH bss 2
wireless-client tx-power 20
antenna-mode 4x4
no 11axSupport
interface radio3
interface bluetooth1
shutdown
mode le-sensor
interface ge1
interface ge2
interface vlan1
ip address 10.136.142.29/25
ip dhcp client request options all
use ip-access-list in BROADCAST-MULTICAST-CONTROL
interface pppoe1
use firewall-policy default
use client-identity-group default
logging on
controller host 10.136.142.25 pool 1 level 1
controller vlan 1
controller hello-interval 1 adjacency-hold-time 2
service pm sys-restart
router ospf
meshpoint-device FMS-MESH
root
preferred interface 5GHz
monitor critical-resource action no-root
monitor primary-port-link action no-root
path-method uniform
exclude wired-peer mint-level-1
acs priority-meshpoint 5GHz FMS-MESH
acs priority-meshpoint 2.4GHz FMS-MESH
adoption-mode controller
!
rf-domain default
location "FMS CONTROL ROOM"
contact kartikl@vareli.co.in
timezone Asia/Calcutta
country-code in
use smart-rf-policy default
ad-wips-wireless-mitigation disable
ad-wips-wired-mitigation disable
!
ap460 00-E6-0E-D9-B1-6C
use profile default-ap460
use rf-domain default
hostname ap460-D9B16C
no lci-config
interface radio1
ldpc
interface radio2
ldpc
no adoption-mode
!
!
end
Friday
Hello Kartik,
Can you please provide the regulatory error (screen shot/output) you are seeing? Is this AP using external antenna's? If so, I don't see any "antenna-gain" configured at the AP Profile and/or Device Level. You will need to see what antenna-model you have and configure the "antenna-gain".
You can download the latest antenna-guide from the following URL: https://supportdocs.extremenetworks.com/support/documentation/antennaguides/
The radios have a static power of 30dBm. You may want to open a support case, in order that we can assist live on this issue. Please call 1-800-872-8440, if you have support entitlement.
Thanks,
Chris Frazee
a week ago
Hello Kartik,
Can you please provide the full model number and the running-config from the AP460e