cancel
Showing results for 
Search instead for 
Did you mean: 

AP460e

AP460e

Kartik
New Contributor II

AP460e regulatory issue found on 5Ghz radio also AP do not transmit full power to 2.4Ghz radio. Showing less dbm eg..10 dbm. Kindly help 

4 REPLIES 4

evelyn69mohr
New Contributor

For the AP460e, the 5GHz radio's regulatory issue might require a firmware update to resolve, as this often addresses country-specific power limits. To fix the 2.4GHz radio's low transmit power (10 dBm), check and adjust the channel and transmit power settings in the access point's configuration.

 

Kartik
New Contributor II

The model number is AP460e WR

Here is the running configuration 

login as: admin

admin@10.136.142.29's password:

ap460-D9B16C>show run

!

! Configuration of AP460 version 7.9.6.1-003R

!

!

version 2.7

!

!

client-identity-group default

 load default-fingerprints

!

ip access-list BROADCAST-MULTICAST-CONTROL

 permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"

 permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit D HCP replies"

 deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-descriptio n "deny windows netbios"

 deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"

 deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP l ocal broadcast"

 permit ip any any rule-precedence 100 rule-description "permit all IP traffic"

!

mac access-list PERMIT-ARP-AND-IPv4

 permit any any type ip rule-precedence 10 rule-description "permit all IPv4 tra ffic"

 permit any any type arp rule-precedence 20 rule-description "permit all ARP tra ffic"

!

ip snmp-access-list default

 permit any

!

firewall-policy default

 no ip dos tcp-sequence-past-window

 no stateful-packet-inspection-l2

 ip tcp adjust-mss 1400

!

!

mint-policy global-default

!

meshpoint-qos-policy default

!

wlan-qos-policy default

 qos trust dscp

 qos trust wmm

!

radio-qos-policy default

!

wlan wlan1

 ssid JEIM_FMS

 vlan 1

 bridging-mode local

 encryption-type ccmp

 authentication-type none

 wpa-wpa2 psk 0 ping 169.254.177.108 -t

!

meshpoint FMS-MESH

 meshid 1

 beacon-format mesh-point

 control-vlan 1

 allowed-vlans 1

 neighbor inactivity-timeout 60

 data-rates 2.4GHz gn

 data-rates 5GHz an

 security-mode none

 root

!

smart-rf-policy default

 assignable-power 5GHz max 20

 assignable-power 5GHz min 16

 assignable-power 2.4GHz max 20

 assignable-power 2.4GHz min 16

 no select-shutdown

 no smart-sensor

 smart-sensor auto-trigger

 smart-sensor band smart-band-5GHz

 smart-sensor tri-radio-only

!

!

management-policy default

 telnet

 no http server

 https server

 rest-server

 ssh

 ssh enable-weak-mac-algo 1

 user admin password 1 89b8e97a75cfce3cf560641d7f43141c492d16b650c93a4426a137b39 cd999ea role superuser access all

 snmp-server community 0 private rw

 snmp-server community 0 public ro

 snmp-server user snmptrap v3 encrypted des auth md5 0 admin123

 snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123

!

profile ap460 default-ap460

 autoinstall configuration

 autoinstall firmware

 crypto ikev1 policy ikev1-default

  isakmp-proposal default encryption aes-256 group 2 hash sha

 crypto ikev2 policy ikev2-default

  isakmp-proposal default encryption aes-256 group 2 hash sha

 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac

 crypto ikev1 remote-vpn

 crypto ikev2 remote-vpn

 crypto auto-ipsec-secure

 crypto load-management

 crypto remote-vpn-client

 interface radio1

  channel 13w

  power 30

  data-rates gn

  placement outdoor

  wlan wlan1 bss 1 primary

  meshpoint FMS-MESH bss 2

  wireless-client tx-power 20

  antenna-mode 2x2

  no 11axSupport

 interface radio2

  channel 161ww

  power 30

  data-rates an

  placement outdoor

  wlan wlan1 bss 1 primary

  meshpoint FMS-MESH bss 2

  wireless-client tx-power 20

  antenna-mode 4x4

  no 11axSupport

 interface radio3

 interface bluetooth1

  shutdown

  mode le-sensor

 interface ge1

 interface ge2

 interface vlan1

  ip address 10.136.142.29/25

  ip dhcp client request options all

  use ip-access-list in BROADCAST-MULTICAST-CONTROL

 interface pppoe1

 use firewall-policy default

 use client-identity-group default

 logging on

 controller host 10.136.142.25 pool 1 level 1

 controller vlan 1

 controller hello-interval 1 adjacency-hold-time 2

 service pm sys-restart

 router ospf

 meshpoint-device FMS-MESH

  root

  preferred interface 5GHz

  monitor critical-resource action no-root

  monitor primary-port-link action no-root

  path-method uniform

  exclude wired-peer mint-level-1

  acs priority-meshpoint 5GHz FMS-MESH

  acs priority-meshpoint 2.4GHz FMS-MESH

 adoption-mode controller

!

rf-domain default

 location "FMS CONTROL ROOM"

 contact kartikl@vareli.co.in

 timezone Asia/Calcutta

 country-code in

 use smart-rf-policy default

 ad-wips-wireless-mitigation disable

 ad-wips-wired-mitigation disable

!

ap460 00-E6-0E-D9-B1-6C

 use profile default-ap460

 use rf-domain default

 hostname ap460-D9B16C

 no lci-config

 interface radio1

  ldpc

 interface radio2

  ldpc

 no adoption-mode

!

!

end

Hello Kartik,

      Can you please provide the regulatory error (screen shot/output) you are seeing? Is this AP using external antenna's? If so, I don't see any "antenna-gain" configured at the AP Profile and/or Device Level. You will need to see what antenna-model you have and configure the "antenna-gain".

You can download the latest antenna-guide from the following URL: https://supportdocs.extremenetworks.com/support/documentation/antennaguides/

The radios have a static power of 30dBm. You may want to open a support case, in order that we can assist live on this issue. Please call 1-800-872-8440, if you have support entitlement. 

Thanks,

Chris Frazee

Christopher_Fra
Extreme Employee

Hello Kartik,

       Can you please provide the full model number and the running-config from the AP460e

GTM-P2G8KFN