cancel
Showing results for 
Search instead for 
Did you mean: 

AP6521 on 5.8.6.9-003R Error 404 in WiNG Manager

AP6521 on 5.8.6.9-003R Error 404 in WiNG Manager

damian3
New Contributor
I am getting an error 404 when attempting to open the GUI of an AP6521 running 5.8.6.9-003R. I have set its memory-profile to standalone but that does not seem to matter. I seem to have to go all the way back to 5.3.1.0-009R in order for the Enterprise GUI, or any GUI for that matter, to load successfully. Has anyone seen this issue? I was sure that I could run the Swift-UI on most versions but I cannot get that to load.
2 REPLIES 2

Angelo_Cargnel
New Contributor III

Hi Damian,

are you sure that have upgraded the AP with the "full" version and not the LEAN version of the firmware?

Error 404 is very common when the AP is running the LEAN version of the firmware.
If you update the AP by a controller, the controller will send the LEAN version due to the restricted memory of the AP6521.
You have to upgrade the AP manually with the full version or you have to upload the full version firmware to the controller.

Regards,
Angelo

rmu
Contributor
hi

maybe you have installed the LEAN image which has no GUI.

also the latest release for ap6521 is 5.8.6.13-002R
> try to install the not-LEAN-image: AP6521-5.8.6.13-002R.img

nr
rmu


GTM-P2G8KFN