AP7532 Client Bridge Not connecting to host

[Aaron_Becker]

I have 2 AP7532s and I'm trying to set up the 2nd to connect to an existing WiFi network. Ultimately, the 2nd 7532 would connect to a completely different WiFi network not associated with a 7532 (though it could be, I suppose).

The 2nd 7532 is not connecting to the original wifi network. I have Radio2 in bridge mode, with the SSID and PSK entered, but the radio does not show that it is connected and the host does not show the 2nd AP as a client. What critical step am I missing?

[ckelly]

I can see in the logs that the radio is changing state from 'bridged' to 'on'.
Not sure if maybe there's something else in the config that I'm not aware that might be causing this though.
What specific version of WiNG-5.9 is this? 5.9.0? 5.9.1? 5.9.2? 5.9.3?

[Aaron_Becker]

Wing is v5.9

Here is the show event-history output:

Generated on '2018-11-06 15:30:31 GMT-6' by 'admin'

2018-11-06 15:30:01 FSDclient SYSTEM LOGIN Successfully logged in user 'admin' with privilege 'superuser' from 'ssh'
2018-11-06 15:25:13 FSDclient NSM DHCPIP Interface vlan3 acquired IP address 192.168.3.18/25 via DHCP
2018-11-06 15:25:13 FSDclient NSM DHCPDEFRT Default route with gateway 192.168.3.1 learnt via DHCP
2018-11-06 15:24:24 FSDclient SYSTEM WARM_START_RECOVER Warm Start Recover. Reason: 'reload' command issued from CLI (user: admin) Timestamp: Nov 06 15:21:50 2018
2018-11-06 15:24:10 FSDclient NSM NTP_START NTP Daemon Restarted
2018-11-06 15:23:11 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:23:11 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Initializing' to 'On'
2018-11-06 15:23:10 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:23:10 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Off' to 'Initializing'
2018-11-06 15:23:09 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_NOT_CONFIG from module DOT11
2018-11-06 15:23:09 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Calibrate' to 'Off(config update)'
2018-11-06 15:23:07 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:23:07 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Off' to 'Calibrate'
2018-11-06 15:23:06 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_NOT_CONFIG from module DOT11
2018-11-06 15:23:06 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Calibrate' to 'Off(config update)'
2018-11-06 15:23:04 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:23:04 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Off' to 'Calibrate'
2018-11-06 15:23:03 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_NOT_CONFIG from module DOT11
2018-11-06 15:23:03 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Calibrate' to 'Off(config update)'
2018-11-06 15:23:01 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:23:01 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Off' to 'Calibrate'
2018-11-06 15:23:00 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_NOT_CONFIG from module DOT11
2018-11-06 15:23:00 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Calibrate' to 'Off(config update)'
2018-11-06 15:23:00 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:23:00 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Off' to 'Calibrate'
2018-11-06 15:22:59 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_NOT_CONFIG from module DOT11
2018-11-06 15:22:59 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'On' to 'Off(smart calibration)'
2018-11-06 15:22:53 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:53 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Bridge' to 'On'
2018-11-06 15:22:53 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:53 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Initializing' to 'Bridge'
2018-11-06 15:22:53 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:53 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Off' to 'Initializing'
2018-11-06 15:22:52 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:52 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'On' to 'Off(cb reconfig)'
2018-11-06 15:22:50 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:50 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:50 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Bridge' to 'On'
2018-11-06 15:22:50 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:50 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Initializing' to 'Bridge'
2018-11-06 15:22:50 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'On' to 'Initializing'
2018-11-06 15:22:50 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:22:50 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Initializing' to 'On'
2018-11-06 15:22:49 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:22:49 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'On' to 'Initializing'
2018-11-06 15:22:48 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:48 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Bridge' to 'On'
2018-11-06 15:22:48 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:48 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Initializing' to 'Bridge'
2018-11-06 15:22:48 FSDclient DIAG NEW_LED_STATE LED state message LED_POWER_OFF from module DOT11
2018-11-06 15:22:48 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R2' changing state from 'Unconfigured' to 'Initializing'
2018-11-06 15:22:48 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:22:48 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Initializing' to 'On'
2018-11-06 15:22:48 FSDclient DIAG NEW_LED_STATE LED state message RADIO_1_24G_LED_ON from module DOT11
2018-11-06 15:22:48 FSDclient RADIO RADIO_STATE_CHANGE Radio 'FSDclient:R1' changing state from 'Unconfigured' to 'Initializing'
2018-11-06 15:22:48 FSDclient NSM NTP_START NTP Daemon Started
2018-11-06 15:22:48 FSDclient MESH MESHPOINT_LOOP_PREVENT_OFF Meshpoint loop prevention off (port ALL), all wired traffic is allowed
2018-11-06 15:22:48 FSDclient DIAG NEW_LED_STATE LED state message AP_LEDS_ON from module DOT11
2018-11-06 15:22:48 FSDclient DIAG NEW_LED_STATE LED state message LED_COUNTRY_CODE_SET from module DOT11
2018-11-06 15:22:48 FSDclient DOT11 COUNTRY_CODE Country of operation configured to US [United States]
2018-11-06 15:22:46 FSDclient DIAG NEW_LED_STATE LED state message LED_LOCATIONING_OFF from module cfgd
2018-11-06 15:22:45 FSDclient SYSTEM SYSTEM_AUTOUP_ENABLE Autoupgrade enabled for ap7562
2018-11-06 15:22:45 FSDclient DIAG NEW_LED_STATE LED state message LED_LOCAL_LICENSE from module CFGD
2018-11-06 15:22:45 FSDclient SYSTEM SYSTEM_AUTOUP_ENABLE Autoupgrade enabled for ap7522
2018-11-06 15:22:45 FSDclient DIAG NEW_LED_STATE LED state message LED_LOCAL_LICENSE from module CFGD
2018-11-06 15:22:45 FSDclient SYSTEM SYSTEM_AUTOUP_ENABLE Autoupgrade enabled for ap7532
2018-11-06 15:22:45 FSDclient LICMGR LIC_INSTALL_DEFAULT AP default license installed, count: 64
2018-11-06 15:22:45 MGMT LOG_HTTP_START lighttpd started in external mode
2018-11-06 15:22:45 DHCPSVR DHCPSVR_STOP DHCP server is stopped
2018-11-06 15:22:44 SYSTEM CONFIG_REVISION Configuration revision updated to 3 from 2
2018-11-06 15:22:44 SYSTEM CONFIG_REVISION Configuration revision updated to 2 from 1
2018-11-06 15:22:44 SYSTEM CONFIG_COMMIT Configuration commit by user 'cfgd' (read startup-config) from '127.0.0.1'
2018-11-06 15:22:44 CFGD ACL_ATTACHED_ALTERED USER: cfgd session 1: ACL attached to interface pppoe1 is getting altered
2018-11-06 15:22:46 NSM IFUP Interface ge1 is up
2018-11-06 15:22:44 CFGD ACL_ATTACHED_ALTERED USER: cfgd session 1: ACL attached to interface pppoe1 is getting altered
2018-11-06 15:22:44 CFGD ACL_ATTACHED_ALTERED USER: cfgd session 1: ACL attached to interface vlan3 is getting altered
2018-11-06 15:22:45 NSM IFDOWN Interface ge1 is down
2018-11-06 15:22:44 CFGD ACL_RULE_ALTERED USER: cfgd session 1: ACL PERMIT-ARP-AND-IPv4 rule is getting altered
2018-11-06 15:22:45 NSM IFUP Interface vlan1 is up
2018-11-06 15:22:44 CFGD ACL_RULE_ALTERED USER: cfgd session 1: ACL BROADCAST-MULTICAST-CONTROL rule is getting altered

[ckelly]

Okay...so when setting up the AP to operate in client-bride mode, that is really all that should be needed.
- Country code-Just to enable the radios
- RFmode set to Bridge
- Client Bridge Settings - Specify SSID and whatever authentication the WLAN uses

So easiest things first:
Can you grab a shot of the output of the command:
#show event history

Also, what version of WiNG is running on the 7532?

[Aaron_Becker]

The country code has been set. Radio1 on the 2nd AP (the one that Radio2 is not working for the bridge) is successfully broadcasting a WLAN as a test.

[ckelly]

Did you set the country code in the RFDomain? If not, neither of the radios will turn on.