cancel
Showing results for 
Search instead for 
Did you mean: 

Can't enable VDC on AP7612 WiNG 7.3.0

Can't enable VDC on AP7612 WiNG 7.3.0

ttl256
New Contributor

Hello

I can't enable VDC on AP7612. When trying to create an anyap profile auto-completion doesn’t show the auto option:

ap7612-XXXXXX(config-profile-PROFILE-01)#virtual-controller ?

  <cr>

Same in the “self” context.

Current software version:

ap7612-FBCAA8#show ver

AP7612 version 7.3.0.3-003R

I think it should be possible due to: WiNG_7.3.0_Controller_Access_Point_CLI_Reference_Guide

As it says:

f82b57ada82a4244a5d034c861bdc0b1_933f99e8-0a26-4558-a6c1-8a240eb809b1.png

 

Am I missing something?

2 REPLIES 2

ttl256
New Contributor

Hello Robert

I meant DVC - dynamic virtual controller. Sorry about that.

I want to implement virtual controller redundancy in AP7612 environment. However I can’t configure virtual-controller auto as well as set management IP address since I don’t have this option in the profile context. All I can do is virtual-controller.

According to the CLI reference guide for WiNG 7.3.0 AP7612 should support this functionality.

0fe1e407ee394163af2be778f1553c06_683760cc-f1ae-4145-9c03-07e54b64dfa4.png
My unsuccessful attempts to configure Dynamic Virtual Controller

 

RobertZ
Extreme Employee

What do you mean by “I can't enable VDC on AP7612“?

Are you trying to turn the AP7612 into a Virtual Controller?  

 

See below kb articles: 

How to turn a WiNG AP into a virtual controller

Can a WiNG virtual controller adopt different model (heterogeneous) as well as Express APs?

How to create Virtual Controller redundancy? 

GTM-P2G8KFN