Cant upgrade attached AP7522 firmware

[MatzR]

Hello,

I woud like to update/upgrade our Wing AP7522 APs from 5.8.6.9 to 5.9.1.1.

I using the express UI.

When I update the virtual controller, only this one will be upgraded after the progress. The other three will not.

I have tried several options:

1. I tried upgrade the VC (this should be the standard way, right?)
2. I tried to downgrade to 5.8.6.0. first. I thought it might still be the same bug. please refer: https://extremeportal.force.com/ExtrArticleDetail?an=000081096
3. I tried upgrade the attached APs over its own Webinterface. When I do this, the AP will startup with the new Firmware then goes down by itself and startup next with the old firmware.

What am I doing wrong? Thank you for your help in advance

[RobertZ]

You have to perform the upgrade of VC (express) a second time, this will load the device image to the VC that it will use to upgrade the adoptees.

[MatzR]

I have a ssh connection now. The AP 192.168.0.232 (NOT THE VC) has the firmware 5.8.6.0 as Secondary Image (witch I tried to load (see Point 2 in my Post ). How can I load the Secondary Image for the next boot? "boot system secondary" doesn't work. It shows "% Invalid input detected at '^' marker." So "boot" is not available.

Many Thanks

[Darrel_Rhodes]

Hi Matz,

The interface is referred to as Swift - but shouldn't be a an issue for you (it's nice and user-friendly!)

In the screen where you sent the screenshot - underneath the text "Managed Access Points' There is a drop-down 'Tools' menu. Is there a firmware upgrade option in that menu?You will need to check the boxes on the left hand side to select which APs to upgrade.

Many thanks,
Darrel.

[RobertZ]

Virtual Controller - adopted APs won't upgrade firmware
 

[RobertZ]

How to upgrade adopted APs from a WiNG virtual controller