CLI to see connected clients in real time?

[Jacob_Airov]

Does anyone know if there is a command line to monitor and/or see which clients are connected to a particular WLAN?

This is for Wing v8.5 on a VX9000 controller.

Thanks!

[Bin]

Thank your for all of nice posts. WiNG CLI is really the powerful tool .

[Jacob_Airov]

Thanks for the help guys, these commands worked great!

[Shay_Weir]

Yes. You can also run these commands on the AP. IT will show just those clients on that particular AP. Same filters apply. Good filter(s) to use are

show wireless client |include
show wireless client |exclude

the |include or |exclude work for most show command to help reduce what you list out or need to see when you have many clients, AP.....

[Daniel_Fraile_V]

Hello Jacob,

You can see the clients connected to an specific adopted AP with the following command:

show wireless client on apNAME | include wlanName

By grepping the result as on other recommended comment you will filter for a specific WLAN. So it is not necessary to log directly on the AP you want to see the clients connected.

Kind regards,

Daniel