dot11i timeout wing 5.8.5

[Phil_storey]

Motorola G3/4 mobile phones will not authenticate with wlan, Dot11i timeout. If I set the wifi to be Open its fine, but will not connect using wpa-ccmp or wpa2-ccmp. I have changed the timeouts
to the following
(config-wlan-test)#wpa-wpa2 handshake attempts 5
(config-wlan-test)#wpa-wpa2 handshake timeout 200 300 400 500

Sometimes it will connect and then drops. I have tried this on a BNOB ( Brand new out the Box ) Motorola G4 and it does the same as the G3

Iphone connects no problem , But the strange thing is My G4 connects fine

the G3's are at andriod v6.01 anf my G4 is at v7.0

The AP's are a Mixture of 7131 / 7532 Dual radio 2.4 & 5Ghz

Any Idea's please on how to fix

[Phil_storey]

hi, I have created a smart RF policy,, and that seems to have settled things down for,
thanks for your help

[Phil_storey]

I will try tomorrow,

thanks for your assistance

[Edmundo]

You set the target tftp?

Try:

RFSXXXX#remote-debug live-pktcap rf-domain default write tftp://x.x.x.x/wireless.pcap radio all count 20000 filter ether host 00-23-68-A9-FD-5F

[Phil_storey]

Hello
I tried the "remote-debug live-pktcap rf-domain radio all count 1000 filter dot11 addr 1 and dot11 addr 2 and dot11 addr 3 "

adding the mac of the device in question and it reports nothing back, I ran the same command on a device I could see attached to an AP , same result nothing displayed
Strange 