This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
ExtremeWireless (WiNG)
Questions and discussions about WiNG devices
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Start a conversation

VX9000 VLAN configuration and VMware

We have installed VX9000 (7.9.1.0-022R) on ESXi (7.0.3). Everything work till adding some more VLANs and put IP 10.0.4.254 in VLAN40 and created new VLAN1 and set 10.0.9.254 IP. After that we were unable to access the controller. We put Ge1 to trunk ...

Andrej_N by • New Contributor
  • 2413 Views
  • 6 replies
  • 0 kudos

AP8533 and 802.3at not working

Hi,i got problem with AP8533 and proper PoE powering. I got HP Procurve 2920 PoE+ switch and connected AP8533 but when i check details of this AP there is information that used standard is 802.3af.There is no additional configuration on switch - defa...

Maciek by • New Contributor
  • 2764 Views
  • 9 replies
  • 0 kudos

Resolved! RFDM Flipping

Hi,I've had a VX9000 + 14 APs running okay since their set up at the end of last year  We lost a site so we went down to 1 site, 9 APs, and I removed RF-domain for that (I don't know if that is relevant, but it's worth mentioning). We had a power out...

RMarshall by • New Contributor
  • 964 Views
  • 1 replies
  • 1 kudos

AP560h used for AP on a stick survey

Hi,Back in March I asked this forum if AP settings configured in the XCC remain on the AP if it is disconnected from the network, and powered by a battery. The answer I got is that it does, https://community.extremenetworks.com/t5/extremewireless-win...

GTM-P2G8KFN