dot11i timeout wing 5.8.5
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-17-2017 08:24 AM
Motorola G3/4 mobile phones will not authenticate with wlan, Dot11i timeout. If I set the wifi to be Open its fine, but will not connect using wpa-ccmp or wpa2-ccmp. I have changed the timeouts
to the following
(config-wlan-test)#wpa-wpa2 handshake attempts 5
(config-wlan-test)#wpa-wpa2 handshake timeout 200 300 400 500
Sometimes it will connect and then drops. I have tried this on a BNOB ( Brand new out the Box ) Motorola G4 and it does the same as the G3
Iphone connects no problem , But the strange thing is My G4 connects fine
the G3's are at andriod v6.01 anf my G4 is at v7.0
The AP's are a Mixture of 7131 / 7532 Dual radio 2.4 & 5Ghz
Any Idea's please on how to fix
to the following
(config-wlan-test)#wpa-wpa2 handshake attempts 5
(config-wlan-test)#wpa-wpa2 handshake timeout 200 300 400 500
Sometimes it will connect and then drops. I have tried this on a BNOB ( Brand new out the Box ) Motorola G4 and it does the same as the G3
Iphone connects no problem , But the strange thing is My G4 connects fine
the G3's are at andriod v6.01 anf my G4 is at v7.0
The AP's are a Mixture of 7131 / 7532 Dual radio 2.4 & 5Ghz
Any Idea's please on how to fix
7 REPLIES 7
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎06-08-2017 09:23 AM
hi, I have created a smart RF policy,, and that seems to have settled things down for,
thanks for your help
thanks for your help
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-22-2017 02:30 PM
I will try tomorrow,
thanks for your assistance
thanks for your assistance
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-22-2017 02:10 PM
You set the target tftp?
Try:
RFSXXXX#remote-debug live-pktcap rf-domain default write tftp://x.x.x.x/wireless.pcap radio all count 20000 filter ether host 00-23-68-A9-FD-5F
Try:
RFSXXXX#remote-debug live-pktcap rf-domain default write tftp://x.x.x.x/wireless.pcap radio all count 20000 filter ether host 00-23-68-A9-FD-5F
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-22-2017 07:42 AM
Hello
I tried the "remote-debug live-pktcap rf-domain radio all count 1000 filter dot11 addr 1 and dot11 addr 2 and dot11 addr 3 "
adding the mac of the device in question and it reports nothing back, I ran the same command on a device I could see attached to an AP , same result nothing displayed
Strange 
I tried the "remote-debug live-pktcap rf-domain
adding the mac of the device in question and it reports nothing back, I ran the same command on a device I could see attached to an AP , same result nothing displayed
Strange 