Error creating an AP305c profile in the VX9000 controller (v7.6.2)

[Matheus_Santana]

Hello,

Im trying to create a profile for an AP305c in VX9000 controller, but every time I try, this error occours:

Message :Invalid value. range: ['rfs7000', 'rfs6000', 'rfs4000', 'ap71xx', 'ap650', 'ap6532', 'ap621', 'ap6521', 'ap6511', 'ap622', 'ap6522', 'ap7502', 'ap6562', 'ap81xx', 'ap82xx', 'ap7532', 'ap7522', 't5', 'ex3524', 'ex3548', 'ap7562', 'ap8533', 'ap8432', 'ap7602', 'ap7622', 'ap7612', 'ap7632', 'ap7662', 'ap510', 'ap510-1', 'ap505', 'ap560', 'ap410', 'ap460', 'ap410-1', 'ap310', 'ap360', 'ap310-1', 'ap360-1', 'ap410c', 'ap302w', 'ap305c', 'ap305cx', 'ap460c', 'ap460s6c', 'ap460s12c', 'nx5500', 'rfs4000', 'anyap']
ErrorPath :/wing-config/profile
Severity :error
Type :Application Error

 How can I fix this? The version running in the controller is 7.6.2.

[Christoph_S]

Hello Matheus,

When it comes to universal APs, please use NOVA UI or CLI as the legacy Enterprise UI does not support said APs. 

We would recommend CLI in your case. 

On the controller run the following commands:

>en
#config
#profile ap305c <profile-name>                         (default profile name is: default-ap305c)
#com wr

BR​​​

------------------------------
Christoph S.
------------------------------

[RenatoM1]

Hello Matheus,

I had same problem, I solved the problem by enable the new interface.
https://extremeportal.force.com/ExtrArticleDetail?an=000101356&q=how%20to%20enable%20nova