cancel
Showing results for 
Search instead for 
Did you mean: 

Error creating an AP305c profile in the VX9000 controller (v7.6.2)

Error creating an AP305c profile in the VX9000 controller (v7.6.2)

Matheus_Santana
New Contributor III
Hello,

Im trying to create a profile for an AP305c in VX9000 controller, but every time I try, this error occours:

Message :Invalid value. range: ['rfs7000', 'rfs6000', 'rfs4000', 'ap71xx', 'ap650', 'ap6532', 'ap621', 'ap6521', 'ap6511', 'ap622', 'ap6522', 'ap7502', 'ap6562', 'ap81xx', 'ap82xx', 'ap7532', 'ap7522', 't5', 'ex3524', 'ex3548', 'ap7562', 'ap8533', 'ap8432', 'ap7602', 'ap7622', 'ap7612', 'ap7632', 'ap7662', 'ap510', 'ap510-1', 'ap505', 'ap560', 'ap410', 'ap460', 'ap410-1', 'ap310', 'ap360', 'ap310-1', 'ap360-1', 'ap410c', 'ap302w', 'ap305c', 'ap305cx', 'ap460c', 'ap460s6c', 'ap460s12c', 'nx5500', 'rfs4000', 'anyap']
ErrorPath :/wing-config/profile
Severity :error
Type :Application Error
 How can I fix this? The version running in the controller is 7.6.2.
2 REPLIES 2

Christoph_S
Valued Contributor II
Hello Matheus,

When it comes to universal APs, please use NOVA UI or CLI as the legacy Enterprise UI does not support said APs. 

We would recommend CLI in your case. 

On the controller run the following commands:

>en
#config
#profile ap305c <profile-name>                         (default profile name is: default-ap305c)
#com wr

BR​​​

------------------------------
Christoph S.
------------------------------
Christoph S.

RenatoM1
New Contributor
Hello Matheus,

I had same problem, I solved the problem by enable the new interface.
https://extremeportal.force.com/ExtrArticleDetail?an=000101356&q=how%20to%20enable%20nova

GTM-P2G8KFN