- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
03-27-2020 10:09 AM
Hi, I have this device and I have a problem with Google Chromecast.
Chromecast connects to wifi but my phone doesn’t find the Chromecast and cast doesn’t work.
Can you help me please?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
03-27-2020 03:10 PM
- Run putty.exe
- Select SSH radio button
- Enter IP address of AP and click Open
- Log into AP and type the following commands
conf t press enter
WLAN wlan 5 press enter
client-client-communication press enter
com wr press enter
OR an easier way for you may be to follow these instructions from GUI:
For the version just type the command: show version
or from GUI go to Configuration » Access Points » You should see the version in the Firmware column.
Thank you,
Chris
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
03-27-2020 05:04 PM
My pleasure!
We need every bit of entertainment during these difficult times. Enjoy and stay safe!
Chris
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
03-27-2020 04:51 PM
It works!!! Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
03-27-2020 03:47 PM
Good?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
03-27-2020 03:39 PM
Radio 1 should be 2.4GHz or off if you don’t want to use it and radio 2 should be set to 5GHz.
Firmware is dated but not too badly.
If you want to upgrade you will need to have a valid support contract to be able to download the firmware.
