Hi all I have problem about port configuration between WLC(NX5000) and core switch(Cisco catalyst) vlan 11 for manage APs vlan 10 for manage all device (swtich,WLC,server ,etc) On WLC(NX5500) uplink port configure as Trunk native vlan 11 No ...
code:Hello good morning, I hope you are well, I have a series of doubts regarding the following case:* I have an NX5500 with several AP7532 adopted.* I have 3 SSIDs each with a different VLAN 116,117 and 118, to which I want to assign a DHCP server w...
Hi, I have a customer that wants to provide WiFi access over a 60.000 sqm open storage area and was wondering if sixty 7662 APs with internal antennas and MESHCONNEX setup controlled by a VX9000 controller would be enough to cover the whole area. ...
Hi all - I'm writing from a College environment where we have just over 850 WiNG APs. We are currently running WiNG 5.9.5.0-007R. We are ~2 weeks into our semester and we have just recently started receiving many complaints about network speeds/re...
We have a need to disable the snmp traffic for our MineStar fleet and Cat is telling us to disable/block this from the ap side. Does anyone know how to do this?
