how to correct configure snmp community in a RFS6000 controller

[Elias_Morais_Pe]

Hi,

I tried to set up a snmp community on the RFS6000 controller that we own, but it doesn't seem to be working.

I set up the snmp communit and then in Rule > Allow Permit > Type Any ACL I try to include the ANY option, but it returns an error about not having an IP.

See error below.

Detail :Not Available
Message :Invalid IPv4/mask format
ErrorPath :/wing-config/ip_snmp_acl[ name='cti' ]/ip_snmp_acl_rule
Severity :error
Type :Application Error
**********************************



Any idea?

[Elias_Morais_Pe]

Hi Cong,

We don't have paid support account too.

[PhuD]

Thanks!

[Christoph_S]

Hello Morais,

Try to create same (ACL rule and community string) via CLI per these instructions letting us know if you still have issue: https://extremeportal.force.com/ExtrArticleDetail?an=000094294

What firmware version is the RFS6000 running on?

I hope this helps,

------------------------------
Christoph S.
------------------------------

[Elias_Morais_Pe]

Hi Christoph, thanks for the answer!!!

I tried the commands in the article but it gives me the error below:

$ ssh admin@172.16.15.1
admin@172.16.15.1's password:
Cannot handle term 'xterm-256color'. Setting term to dumb.
rfs01>en
rfs01#config
Enter configuration commands, one per line. End with CNTL/Z.
rfs01(config)#ip snmp-access-list cti
rfs01(config-ip-snmp-acl-cti)#permit any
% Error: Invalid IPv4/mask format
rfs01(config-ip-snmp-acl-cti)#

RFS6000 firmware version: 5.8.6.9-003R

Any idea?