How to switch off LED of a single AP 7522 permanently ?

[info_systemhaus]

I have s small private customer solution with 5x AP7522, without central Controller.
one of the AP´s is the virtual Controller.

customer demands that we switch of the LED´s on the AP´s permanently, he don´t want to have

any blinking or flashing.

As per CLI Reference there is a command .. #NO LED for Profiles.

I tried to select the AP via CLI and his mac address and set this command .. "no success"

I tried to select the builtin AP 7522 Profile and set this command "no success"

i made a "commit" and reload .. "no success"

where is my fault ?

I can not imagine, that is not possible on such a professional AP to Switch off the LED´s ...

Regards

Chris

[Bastian_Sprotte]

Chris,

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-physically-locate-an-AP-using-the-L...

can you review that article

also have you test if you login on the AP to use the NO LED command.

Bastian
-