LED's on AP7532

[hayman]

hello everyone,
is there any way that i can turn off the Leds on my 2xAP7532 so that will be nice white on the ciling without led ...?
thanks

[Christopher_Fra · Accepted solution]

From CLI (via controller if AP is adopted or directly from AP in stand-alone mode):

From controller:

enable [enter]
config [enter]
profile ap7532 xxxxxxx [enter] (x represents AP profile)
no led flash-pattern [enter]
com wr [enter]

From AP at device level:

enable [enter]
config [enter]
self [enter]
no led flash-pattern [enter]
com wr [enter]