Obtaining IP address failed
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-30-2018 04:53 AM
Hi,
I have adopted AP7502 to wing controller VX9000 and also configured SSIDs and mapped to Radios. Now broadcasting is getting but, when I log in to created SSIDs showing error-obtaining IP address failed.
I have adopted AP7502 to wing controller VX9000 and also configured SSIDs and mapped to Radios. Now broadcasting is getting but, when I log in to created SSIDs showing error-obtaining IP address failed.
9 REPLIES 9
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-04-2018 10:57 AM
Is there even a router that routes between the different VLANs ?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-04-2018 10:57 AM
NO
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-04-2018 10:12 AM
Are wireless clients connecting to wlans mapped to VLANs other than VLAN1 pulling an IP address?
1 - Access every wlan and in the vlan assignment field under basic configuration make sure you have entered the correct vlan
2 - In system profile, under Interface > Ethernet ports > ge1, make sure the port is set to Trunk and all vlans are listed in the allowed vlans field
3 - On your switch, make sure the same vlans are allowed on the ports the APs are connected to.
1 - Access every wlan and in the vlan assignment field under basic configuration make sure you have entered the correct vlan
2 - In system profile, under Interface > Ethernet ports > ge1, make sure the port is set to Trunk and all vlans are listed in the allowed vlans field
3 - On your switch, make sure the same vlans are allowed on the ports the APs are connected to.
Christoph S.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎09-04-2018 10:12 AM
the router is missing - see below post
