Outdoor Antenna operation chart?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2017 05:23 AM
Hi everybody,
Could someone explain me how does the antenna operation in this chart below?
Thanks so much!
Could someone explain me how does the antenna operation in this chart below?
Thanks so much!
9 REPLIES 9
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2017 09:59 AM
Excellent resource! The linear vs dB charts put it all into perspective quite nicely.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2017 06:54 AM
Do you have Ekahau or some comparing tool? It's the best way to understand the antenna pattern.
The blue line is Azimuth, 360°
The red line is Elevation, 30°
Based on the smaller Elevation the antenna get a higher gain.
The blue line is Azimuth, 360°
The red line is Elevation, 30°
Based on the smaller Elevation the antenna get a higher gain.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2017 06:54 AM
A very visual explanation! Thanks Timo.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2017 06:54 AM
Hi,
best is to take a look into the CWNA.
The perfect antenna pattern is like a round balloon. If you now need more gain to one site, you deform the balloon. A high gain omni antenna as example, if you push from top and bottom you get more to the outside. This is how you can get a high gain omni antenna. But your gain to top and bottom is not as big as it was. As more as you pressing booth sides, as more gain you get to the outside. But at the same time you'll lose the gain to top and bottom.
If you mounting a high gain antenna at a high of 15 meters, you maybe have no connection under the antenna. Based on the angle the signal is transmitted above you.
Same for a patch antenna, you pressing left, right, bottom, tot and behind the balloon and get more gain to the front.
I hope my english isn't too bad to describe this.
best is to take a look into the CWNA.
The perfect antenna pattern is like a round balloon. If you now need more gain to one site, you deform the balloon. A high gain omni antenna as example, if you push from top and bottom you get more to the outside. This is how you can get a high gain omni antenna. But your gain to top and bottom is not as big as it was. As more as you pressing booth sides, as more gain you get to the outside. But at the same time you'll lose the gain to top and bottom.
If you mounting a high gain antenna at a high of 15 meters, you maybe have no connection under the antenna. Based on the angle the signal is transmitted above you.
Same for a patch antenna, you pressing left, right, bottom, tot and behind the balloon and get more gain to the front.
I hope my english isn't too bad to describe this.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2017 06:54 AM
Hi Timo,
So why is the red line out of the blue line? They should be the same farthest boder line?
What does the information show it has 30° Elevation?
Thanks.
So why is the red line out of the blue line? They should be the same farthest boder line?
What does the information show it has 30° Elevation?
Thanks.
