NX5500 Controllers
We are currently running an NX5500 cluster in activ/standbuy mode version 7.5.1 we would like to change it to activ activ what do i need to do to make that happen?
Forum Posts
Wing | AP510i-1-WR not adopted by VX9000 controller
Hi GuysOur VX9000 controller do not adopt the AP510i-1-WR, would you please help us with any advice/idea?Single difference that I found is the firmware where the AP510i-1-WR is having 7.7.1.0-005R and VX9000 is having 7.7.0.0-018R.On this VX9000 we h...
Resolved! What antenna ID.should be used in AP460e?
What antenna ID should I configure for 2.4 Ghz 8Dbi MFB24008NMDC and TM55V-NMOMNI-8 5 Ghz 8Dbi non extreme antenna?Country code is- IN
meshpoint unsupported data-rates on AP460e
HI! I am getting a lot of similar logs as follows:AP-92 %DOT11-5-NEIGHBOR_DENIED_ASSOC: Neighbor '48-9B-D5-EF-CF-F0' denied association on radio 'AP-92:R2' meshpoint 'MCX': unsupported data-rates What could be the reason? I have set channel-width to ...
AP510e Maximum Transmission Power at 18dbm
I am configuring my AP510e with a ml-2452-apa2-02 antenna. I have set the transmission power to be the highest but for some reason, I can't get past 15dbm on 2.4ghz and 18 dbm on 5ghz.Let's use 2.4ghz as an example.From 'show wireless regulatory devi...
