RFS4000 - Does not adopt AP's

[HarryWombat]

OK, so life is not great. Had an RFS4000 die on me and have had a spare in the cupboard for a loooog time. Plugged it in and setup the basic information on it but the unit does not want to adopt the AP's. Is there a way I can force the 4000 to 'find' the AP's. These are the details of the 4000

rfs4000-DCD5C0 uptime is 0 days, 04 hours 43 minutes
CPU is Cavium Networks Octeon CN50XX V0.1
190804 kB of on-board RAM
Base ethernet MAC address is B4-C7-99-DC-D5-C0
System serial number is 122...34
Model number is RFS-4010-00010-WR
PoE firmware version is 211 build 1
FPGA version is 2.28

Appreciate any words of wisdom anyone can offer me.

By the way the AP's are not accessible unless you want to ride up in a high reach scissor lift which maybe my only option if the devices have to be replaced.

Thanks
Harry Wombat

[RobertZ]

Hello,

Rfs4000 have build in 6 aap licenses.

Regards,

Aviv
Can we see the output of follow CLI command:

show adoption stauts

[Daren_Ellis]

Hello,

Can you provide us some more information in regards to the deployment.

• What version of code are the existing APs on
• What model AP is installed
• what version of code is the new controller running
• Are the APs in the same broadcast domain as the controller.

[Aviv_Kedem]

Hello,

Rfs4000 have build in 6 aap licenses.

Regards,

Aviv

[RobertZ]

Does this RFS4000 have any license?
You can check with CLI command 'show license'

Note that with out license it can not adopt any APs.