rfs4000 with ap7632 and ap8432

[Ahmed_Abbas]

Hi all,

I have problem with the rfs4000 I already upgraded the code to 5.9.1.0 and I have 2 APs (ap7632 and ap8432) so I connected these 2 APs direct to the rfs4000 and I can see them online through the dashboard and created SSID with broadcast option but I can’t see any things, tried to setup the static IPs but still the same problem. Anyone has a good guide that can I start with to create the SSIDs with Vlans or any information.  

Thank you and appreciated 

[Ahmed_Abbas]

Is there any way to downgrade? 

[ckelly]

A downgrade of the controller would also require firmware for the controller.

You can contact GTAC….I think that you might still be entitled to the level of firmware on the controller (and APs) that was loaded when you originally purchased them.  Possibly also the firmware revisions that were released during the time period that you were under maintenance.  GTAC will be able to clarify this though since I’m not 100% certain.

[Ahmed_Abbas]

I’ll try, Thank U so much Chris!

[Ahmed_Abbas]

Hi all,

I tried to upgrade the ap7632 connected with rfs4000 but I can’t I did the upgraded for rfs4000 by USB stick but with this AP I can’t so is there anyway can I take to upgrade ap7632 by cli or gui I tried both but I can’t.

thank you, 

Ahmed