Tx management rate

[WojciechS]

Hi,
Couple days ago we had our site with AP310Es surveyed. The suggestion that came up after is, that we should increase our Tx management rate to 24Mbit/s. Can you please point me where I can find it in the WiNG controller? I can't locate it anywhere...

[Angelo_Cargnel]

Hi Wojciech,

you do have different options to do so.
The basic (mandatory) and optional data rates can be configured either on a radio (then the setting will apply to all WLANs mapped to the radio) or for a WLAN profile.
The CLI command for setting the rates on a radio is:

data-rates custom basic-24 36 48 54 mcs0-31

This will set 24 Mbps to basic (and lowest data rate) and will enable all other data rates as optional.

The CLI command for setting the rates on a WLAN profile is:

data-rates 2.4GHz custom basic-24 36 48 54 mcs0-31 or
data-rates 5GHz custom basic-24 36 48 54 mcs0-31

This will set 24 Mbps to basic (and lowest data rate) and will enable all other data rates as optional.

Best regards,
Angelo