Extreme Networks

Shubha_m13 · ‎11-21-2019

share the list of access point which can register to VX9000 controller.

wonga · ‎11-21-2019

Indoor APs
- AP 8533 - Tri Radio indoor 4x4:4 - 802.11ac/abgn Wave 2 MU-MIMO
- AP 8432 - Dual Radio indoor 4x4:4 - 802.11ac/abgn Wave 2 MU-MIMO
- AP 7532 - Dual Radio indoor 3x3:3 - 802.11ac/abgn Wave 1 MIMO
- AP 7522 - Dual Radio indoor 2x2: 802.11ac/abgn Wave 1 MIMO
- AP 7502 - Dual Radio wall plate 2x2:2 802.11abgn MIMO
- AP 7602 - Dual Radio wall plate 1x1: 2.4G1+ 1x1:5G or 2x2:2.4G or 2x2:5G 802.11ac/abgn MIMO
- AP 7622 - Dual radio indoor 1x1: 2.4G1+ 1x1:5G or 2x2:2.4G or 2x2:5G 802.11ac/abgn MIMO
- AP 7612 - Dual radio wall plate 2x2:2 802.11ac/abgn Wave 2 MIMO
- AP 7632 - Dual radio indoor 2x2:2 802.11ac/abgn Wave 2 MIMO
Outdoor APs
- AP 7562 - Dual Radio outdoor 3x3:3 802.11ac/abgn Wave 1 MIMO
- AP 8163 - Tri Radio Outdoor 3x3:3 802.11abgn MIMO
- AP 7662 - Dual radio outdoor 2x2:2 802.11ac/abgn Wave 2 MIMO

**WiNG 5.9.6

View solution in original post

wonga · ‎11-21-2019

Attached WiNG 7.2.1 Release Notes.

wonga · ‎11-21-2019

AP 7522, 7532, 7562, 7612, 7632, 7662, 8432, 8533 are now fully supported on WiNG 7.2.1 release with the same feature set as in WiNG 5.9.6 per release notes.

Max_McGrath · ‎11-21-2019

I didn’t think the AP7502 was supported in 7.2.1. Can you please confirm?

Thanks!

ckelly · ‎11-21-2019

All of those listed models except the below are supported in wing 7.2.1

AP7602

AP762

AP8163

Extreme Networks

VX9000 AP Support

VX9000 AP Support