Where is "RSS Threshold" or similar on the 7532 ap

[Elias_Morais_Pe]

Hello guys,

I would like to know where I find the "RSS Threshold" or similar on the RF domain profile of 7532 ap?

It has some document of better configurations for an environment with more than 50 7532 ap with rfs 6000 controller.

[Tuan_Nguyen1]

Hi Elias,

use roaming assistance policy then

VX(config)# roaming-assist-policy RSSIVX(config-roaming-assist-policy-RSSI)# handoff-threshold <-100--40> RSSI
VX(config)# wlan RSSIVX(config-wlan-RSSI)# use roaming-assist-policy RSSI Make sure though, you have some "room" for roaming overlap.
Confirm with client RF statistics

VX# show wireless client statistics rf on
Regards,
Ondrej

Hi @Ondrej Lepa

CLI: handoff-threshold <-100--40

Means the threshold of RSSI -40 to -100dbm right?. If i need signal smaller than -75dbm it is disconnected or pass to another AP with a better signal i set CLI to
VX(config-roaming-assist-policy-RSSI)# handoff-threshold <-75--40> RSSI

I'm doing right?

[Ondrej_Lepa]

Hi Elias,

I bet this is something you can configure only using CLI.

Regards,
Ondrej

[Elias_Morais_Pe]

Hi Ondrej,

I searched the options via wegui but did not find it. Can I make these settings via wegui, or only via terminal?

[Ondrej_Lepa]

Hi Elias,

use roaming assistance policy then

VX(config)# roaming-assist-policy RSSI
VX(config-roaming-assist-policy-RSSI)# handoff-threshold <-100--40> RSSI
VX(config)# wlan RSSI
VX(config-wlan-RSSI)# use roaming-assist-policy RSSI

Make sure though, you have some "room" for roaming overlap.
Confirm with client RF statistics

VX# show wireless client statistics rf on

Regards,
Ondrej

[Ondrej_Lepa]

Hello Elias,

do you mean something like this?
VX# show wireless radio statistics rf on

Regards,
Ondrej