WiNG 4 AP Serial Number list

[Sharpy]

Hi All, in WiNG 5 we can issue 'sh adopt info' and get a readout of all AP's currently online. Is there a WiNG 4 equivalent?

[Sharpy]

Thanks for the replies, very much appreciated!

The answer in my case is that the MAC also doubles as the Serial Number (on the AP300 at least) Thanks Andrew Webster for that.
It means I can easily log inventory from 'sh wi ap' alone 🙂

[RobertZ]

I don't think that via cli you can get the output of the APs serial numbers, GUI is your best bet.

Here is the Syntax
show wireless [ap|client|domain|mesh|meshpoint|radio|regulatory|sensor-server|
unsanctioned|wips|wlan]
show wireless ap {configured|detail|load-balancing|on }
show wireless ap {configured}
show wireless ap {detail} {} {(on )}
show wireless ap {load-balancing} {client-capability|events|neighbors} {(on )}

[RobertZ]

Via CLI:

rfs7000-37FABE(config)#show wireless ap configured
-------------------------------------------------------------------------------------
IDX NAME MAC PROFILE RF-DOMAIN ADOPTED-BY
-------------------------------------------------------------------------------------
1 ap71xx-4AA708 00-04-96-4A-A7-08 default-ap71xx default un-adopted
2 ap71xx-11E6C4 00-23-68-11-E6-C4 default-ap71xx default un-adopted
3 ap650-000001 00-A0-F8-00-00-01 default-ap650 default un-adopted
-------------------------------------------------------------------------------------
rfs7000-37FABE(config)#

[RobertZ]