01-19-2022 11:51 AM
01-20-2022 09:18 AM
Hi Matt,
I was referring to the CLI commands.
In the GUI have to select Configuration/Devices/System Profile/
double click on your profile, e.g. default-ap7522 and then move to Management/Settings.
There you will find the section "Events E-mail Notification" in the lower half of the screen:
To configure and map the Event-System policy to the AP profile move to Configuration/Devices/Event Policy.
If you click there "Activate Event Policy"
the policy is automatically mapped to the AP profile.
Best regards,
Angelo
01-20-2022 08:58 AM
01-20-2022 03:11 AM
Yes,
this is possible.
First you have to configure in the AP profile or override the email details, like server and recipient.
Commands are "email-notification host" and "email-notification recipient".
Next you have to configure an event-system policy. In this policy are 432 events already pre-defined, but all are configured as off, e.g.:
event diag cpu-load syslog off snmp off forward-to-switch off email off
For each event you want to receive an email for, you have to configure the parameter "email" to "on".
Once done you have to assign this event-system policy to the AP profile or override.
That's it...