cancel
Showing results for 
Search instead for 
Did you mean: 

WiNG AP510 Port Forwarding

WiNG AP510 Port Forwarding

oxoyoz
New Contributor III
Hi,
I am using AP510 as router + AP setting currently. The AP currently runs with 7.6.X firmware.
A device connected to AP510 needs to have a 19XXX port (TCP and UDP) forwarded, so that its locally-stored content can be access from external IPs. 
Does AP510 offer port forwarding function? If yes, where can I enable this function? ( CLI command / GUI both work ) 
Thanks for your help in advance.
5 REPLIES 5

Christoph_S
Extreme Employee
My pleasure!

BR

Chris
Christoph S.

oxoyoz
New Contributor III
Hi Chris,

Just want to let you know that your method worked. As long as my WAN IP doesn't change (if it does, then I will have to update NAT rules...), I can access my device from external IPs. 
Thanks again.

Christoph_S
Extreme Employee
There is no option for same. This is not supported. 

BR
Christoph S.

oxoyoz
New Contributor III
Thanks Chris!
My WAN IP address is dynamic. Is it possible to set the WAN IPN as any, instead of a static address?
GTM-P2G8KFN