WiNG AP510 Port Forwarding

[oxoyoz]

Hi,
I am using AP510 as router + AP setting currently. The AP currently runs with 7.6.X firmware.
A device connected to AP510 needs to have a 19XXX port (TCP and UDP) forwarded, so that its locally-stored content can be access from external IPs. 
Does AP510 offer port forwarding function? If yes, where can I enable this function? ( CLI command / GUI both work ) 
Thanks for your help in advance.

[Christoph_S]

Hello,

Here are some instructions you can try. 

PORT FORWARDING: 

Configuration >> Devices >> Device Overrides >> Select the AP >> Security >> NAT >> Static NAT >> Destination >> Add:
Protocol: ANY
Destination IP: WAN address (example: 10.0.0.1, address people are going to go to)
NAT IP: Is the server or computer you want to reach, example 192.168.1.100
Network: Outside
OK > Exit > Commit and Save

Rgds,