cancel
Showing results for 
Search instead for 
Did you mean: 

Wing ap7522 is not managing with WING RFS4000 controller

Wing ap7522 is not managing with WING RFS4000 controller

yohan_vaisseau
New Contributor

Hello,
I have an ap7522 that is adopted by a rfs4000 controller,but when I make
changes to the controller the ap does not take into account the changes.Best regards
28 REPLIES 28

yohan_vaisseau
New Contributor
oh sorry chris, i modify, know i recover the controller configuration well


Andrew_Blomley
Extreme Employee
this need to added to the configuration on the controller not the AP

p7522 B8-50-01-74-D8-40
use prof ile default-ap7522
use rf-domain default
hostname ap7522-74D840
ip default-gateway 172.27.1.254
interface ge1
description Trunk
switchport mode trunk
switchport trunk native vlan 1
no switchport trunk native tagged
switchport trunk allowed vlan 1-4094
interface vlan1
ip address 172.27.1.250/24
controller host 172.26.1.48 level 2

Andrew_Blomley
Extreme Employee
an auto adoption policy is used to define the rf-domain and profile of a device being adopt to the controller. if a policy is not defined the AP will adopt using the default RF-domain and default policy

which is what is happening to this access point

p7522 B8-50-01-74-D8-40
use profile default-ap7522
use rf-domain default


it is then possible to amend the profile and domain manually.

auto adoption policy is a method to automating which rf-domain and which profile is assigned to an access point, using a unique site identifier

yohan_vaisseau
New Contributor
Chris i don't know how APS getting adopted. When i connect the ap in the network, the controller see them, and ap take their config by default.
I modified the config of the ap, but they are no difference

yohan
GTM-P2G8KFN