Wing AP7532 POE consumption

[Bart_Bielewicz]

Hi,

I wonder what is the watts consumption of AP7532? i cant find this info on instalation guide and ap data sheet.

Regards
Bart

[Bart_Bielewicz]

Very informative, thanks all for input.

[Christoph_S]

This off of the AP label itself:

Input rating:

12VDC - 1.25A so 15W
48VDC - 0.375A (POE) so 18W

Regards,

Chris

[Ondrej_Lepa]

Hello Bart,

you can see selected PoE standad using show wireless ap detail

VX# show wireless ap detail on AP

Power management information for ap7532:
Power management Mode : Auto
Power management status : 3af
Ethernet power status : all up
Radio power status : all up
Total number of APs displayed: 1
But better overview you may get on connected switches | PSE (show power status)
Here is example from my lab RFS and two AP7532s
RFS6000# show power status
System Voltage: 53.3 volts
Guard Band: 32 watts
Power Budget: 190 watts Power Consumption: 16 watts
poe device 1 temperature 35C
poe device 2 temperature 33C
--------------------------------------------------------------------------------
PORT VOLTS mA WATTS CLASS STATUS
--------------------------------------------------------------------------------
ge1 53.3 151 8.1 4 On
ge2 53.3 153 8.2 4 On
ge3 0.0 0 0.0 0 Off
ge4 0.0 0 0.0 0 Off
ge5 0.0 0 0.0 0 Off
ge6 0.0 0 0.0 0 Off
ge7 0.0 0 0.0 0 Off
ge8 0.0 0 0.0 0 Off
--------------------------------------------------------------------------------
Regards,
Ondrej

[Ondrej_Lepa]

Note:

Radio utilization, Tx power, amount of clients and RF noise around together with number of services running on AP | PD may change the consumption.

You shall never drop PoE switch | PSE provisioning below .3af standard otherwise the AP | PD may not even boot up correctly.

Regards,
Ondrej