cancel
Showing results for 
Search instead for 
Did you mean: 

Wing controller adaption

Wing controller adaption

Vimalraj_Veerab
New Contributor III
Dear All,

Bonjour,

I'm new to extreme devices and Wing. Can anyone help me understand in adaption what is pool and level. Why should I need to mention pool and level counts.?

EX:- controller host xx.xx.xx.xx pool 1 level 2

7 REPLIES 7

Christina_M
Extreme Employee
Hi there!

This command allows you to select routing levels for IPv4, IPv6, or hostname. At the command line, pool options are 1 or 2 (default is 1). Then choose a routing level: 1 being local routing and 2 being inter-site routing.

Link to doc: http://documentation.extremenetworks.com/WiNG/5.9.1/9035205_WiNG_5_9_1_WC_CLI.pdf (see page 7-68)

Hope that helps!

Hola !!

It happens.

Timo1
New Contributor II
Hi,
you can add two pools of controller for fail over. Most WiNG installation use just one pool.

The level is for MINT links. You can see it as routing, level 1 for local deployments and level 2 for NOC deployments with different RF domains.

Pool1=1-NX-1>,1-NX-2>;Pool2=2-NX-1>,2-NX-2>;level=1|2

It's easy to understood.

Thanks.
GTM-P2G8KFN