Wing controller adaption

[Vimalraj_Veerab]

Dear All,

Bonjour,

I'm new to extreme devices and Wing. Can anyone help me understand in adaption what is pool and level. Why should I need to mention pool and level counts.?

EX:- controller host xx.xx.xx.xx pool 1 level 2

[Christina_M]

Hi there!

This command allows you to select routing levels for IPv4, IPv6, or hostname. At the command line, pool options are 1 or 2 (default is 1). Then choose a routing level: 1 being local routing and 2 being inter-site routing.

Link to doc: http://documentation.extremenetworks.com/WiNG/5.9.1/9035205_WiNG_5_9_1_WC_CLI.pdf (see page 7-68)

Hope that helps!

[Vimalraj_Veerab]

Hola !!

It happens.

[Timo1]

Hi,
you can add two pools of controller for fail over. Most WiNG installation use just one pool.

The level is for MINT links. You can see it as routing, level 1 for local deployments and level 2 for NOC deployments with different RF domains.

Pool1=1-NX-1>,1-NX-2>;Pool2=2-NX-1>,2-NX-2>;level=1|2

[Vimalraj_Veerab]

It's easy to understood.

Thanks.