I'm fairly new to WiNG Wireless.
We have got few AP 7522 and AP 7532. We would like to use WiNG Express.
My question is: Could we make AP7522 a virtual controller and then manage AP7532 or vice versa?
Is there any compatibility matrix available?
Thanks.
In my case, when I tried to make 7532 a VC, I could see 7522s in the VC GUI, but the radios were offline.
When I made 7522 a VC, I could see rest of the 7522s radios online, but 7532's radios were offline.
We are running v5.9.1.3
Heterogeneous AP management in WiNG 5.9.1.0-29R Adds support on the Virtual Controller (VC) AP to manage heterogeneous AP models for the 802.11ac AP platforms.
The following AP models can be deployed in a heterogenous AP VC scenario:
AP 8533
AP 8432
AP 7632/AP 7662/AP 7612
AP 7622/AP7602
AP 7532/AP 7522/AP 7562
Following are the supported adoption hierarchy:
- AP 7662/7632 can adopt AP 7662/7632/7612
- AP 8533/8432 can adopt AP 8533/8432/7562/7532/7522/7662/7632/7622/7612/7602
- AP7532/AP7522/AP7562 can be managed by AP8533/AP8432 but not by AP7632/AP7662
Note:
- Image upload capability will only be enabled on the AP that is elected as VC
- VC can manage up to 64 APs
