I'm experiencing an error when I try to commit any configuration on the VX9000.
Whenever I enter any configuration parameter, I get a boxed message "unknown error occurred in the Server while processing the request".
Remembering that VX is already licensed and there is no other configuration saved besides the IP and the default gateway (which I configured via CLI).
My question is whether this error can be linked to the wrong installation of VX on the client's VM.
What version of firmware did you use to deploy the Wing VX9000? Are you using the NOVA (HTML 5) interface, if using Wing v7.6.3 or higher?
The following are Knowledgebase articles regarding NOVA interface:
NOVA interface will be required, moving forward with Wing. Wing Manager is legacy and is not being sustained any longer.
This error is mostly seen when using the legacy WING-Man in 184.108.40.206, but if using Nova and still see same error I would recommend the following:
1 - Reboot the controller to remove any unsaved settings
2 - Configure a few settings via CLI, do you still get error?
3 - Make sure you adhered to the VX9000 min hardware requirements upon installation, per this article: https://extremeportal.force.com/ExtrArticleDetail?an=000075407