FAQs - Page 4 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

S/N/K-Series Search for Matching Output in 'show' commands

Article ID: 14877 Products S-Series Matrix N-Series DFE K-Series Goals Search for matching output in 'code:show' commands, similar to the use of the UNIX 'code:grep' parameter. Use the pipe character to locate keywords in query command output. Sol...

Setting Network Access Permissions using Radius

Article ID: 7220 Protocols/Features Radius 802.1x MAC Authentication Goals Set Management / Network access permissions using radius. Set super-user / read-write / read-only permission using radius. Symptoms Authentication access type not as expec...

10GB-SRSX-SFPP in combination with MGBIC-LC01

In the K6 series, how to configure the sfp+ port with an 10GB-SRSX-SFPP-modul inserted for the speed of 1GB?

C5/C3/B5/B3-Series Firmware Resolution for DMA Error reset

Article ID: 16165 Products C5-Series; firmware 6.42.10.0016 through 6.61.12.0005, 6.71.01.0067 through 6.71.04.0004, 6.81.01.0027 C3-Series; firmware 6.42.10.0016 through 6.61.12.0005 B5-Series; firmware 6.42.10.0016 through 6.61.12.0005, 6.71.01.0...

G-Series f/w 6.61.07.0010 Reboots if I/O Module Power Off button is pressed for 8+ Seconds

Article ID: 14982 Products G-Series; firmware 6.61.06.0009, 6.61.07.0010 Changes Pressed and held for 8+ seconds (the Hardware Installation Guide recommends 5 seconds) the 'code:POWER OFF' button corresponding to a targeted IOM slot, in preparatio...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN